Chloro(difluoro)methane;1-chloro-1,1,2,2,2-pentafluoroethane

Chloro(difluoro)methane;1-chloro-1,1,2,2,2-pentafluoroethane is a mixed refrigerant blend consisting of two fluorinated compounds with the molecular formula C3HCl2F7. This substance has a molecular weight of 240.93 g/mol and is identified by CAS number 39432-81-0. It belongs to the family of hydrofluorocarbon (HFC) and hydrochlorofluorocarbon (HCFC) compounds, combining chlorodifluoromethane with pentafluoroethyl chloride to create a specialized refrigerant mixture.

Chloro(difluoro)methane;1-chloro-1,1,2,2,2-pentafluoroethane is typically a colorless gas or liquid under pressure at room temperature. As a fluorinated compound mixture, it exhibits low boiling points, making it suitable for refrigeration applications. The substance has limited solubility in water but shows good compatibility with synthetic oils used in refrigeration systems. Its high molecular weight of 240.93 g/mol indicates relatively low volatility compared to simpler refrigerants.

Chloro(difluoro)methane;1-chloro-1,1,2,2,2-pentafluoroethane is primarily used as a refrigerant blend in commercial and industrial refrigeration systems. This mixture serves as a replacement for older refrigerants in air conditioning units, heat pumps, and specialized cooling applications. It may also find use in foam blowing applications and as a propellant in aerosol products. The blend is designed to provide specific thermodynamic properties for optimal cooling efficiency.

Chloro(difluoro)methane;1-chloro-1,1,2,2,2-pentafluoroethane should be handled in well-ventilated areas to prevent vapor accumulation. Wear appropriate personal protective equipment including safety glasses and protective gloves when handling pressurized containers. Avoid direct contact with skin and eyes, as the rapid evaporation can cause frostbite. Use only explosion-proof electrical equipment in areas where vapors may be present. Ensure adequate ventilation as the vapor is heavier than air and can displace oxygen.

Chloro(difluoro)methane;1-chloro-1,1,2,2,2-pentafluoroethane must be stored in appropriate pressure vessels designed for compressed gases. Keep containers in cool, dry, well-ventilated areas away from heat sources and direct sunlight. Store upright and secure cylinders to prevent falling. Avoid storage near incompatible materials such as strong oxidizers. Maintain storage temperatures below 50°C to prevent excessive pressure buildup. Regular inspection of storage containers for leaks or damage is essential.

Skin contact with chloro(difluoro)methane;1-chloro-1,1,2,2,2-pentafluoroethane requires immediate removal from the cold source and gradual rewarming with lukewarm water if frostbite occurs. For eye contact, flush immediately with plenty of water for at least 15 minutes and seek medical attention. If vapors are inhaled, move the person to fresh air immediately and monitor breathing. In case of breathing difficulties, provide artificial respiration if qualified and seek immediate medical attention.

Chloro(difluoro)methane;1-chloro-1,1,2,2,2-pentafluoroethane must be disposed of according to local and national hazardous waste regulations. The substance should be recovered and recycled through authorized refrigerant recovery services rather than released to the atmosphere. Contact licensed waste disposal companies specializing in fluorinated compounds. Never discharge directly into the environment as it may contribute to ozone depletion and global warming. Empty containers should be handled as hazardous waste.

Chloro(difluoro)methane;1-chloro-1,1,2,2,2-pentafluoroethane is classified under ADR Class 2 for transport as a compressed gas. Transportation requires proper documentation, appropriate packaging in UN-approved pressure vessels, and compliance with dangerous goods regulations. Vehicles must be equipped with appropriate safety equipment and drivers require proper training for dangerous goods transport. Ensure adequate ventilation during transport and avoid exposure to heat sources. Emergency response information must accompany shipments.

Chloro(difluoro)methane;1-chloro-1,1,2,2,2-pentafluoroethane is subject to REACH registration requirements in Europe and must comply with CLP classification regulations. The substance is not currently listed as a Substance of Very High Concern (SVHC). It may be regulated under the Montreal Protocol for ozone-depleting substances and the EU F-Gas Regulation for fluorinated greenhouse gases. Companies handling this substance must ensure proper registration, reporting, and compliance with applicable environmental and safety legislation.

Chloro(difluoro)methane;1-chloro-1,1,2,2,2-pentafluoroethane is available through OYSI, a specialized European distributor of technical chemicals and refrigerants. OYSI provides this refrigerant blend to industrial customers across Europe with proper documentation and regulatory compliance. As a professional chemical distributor, OYSI ensures quality standards and provides technical support for refrigerant applications. Contact OYSI directly for availability, technical specifications, and delivery options to your location within Europe.