1,1,2,3,3,3-hexafluoroprop-1-ene

1,1,2,3,3,3-hexafluoroprop-1-ene is a fluorinated organic compound with the molecular formula C3F6 and CAS number 116-15-4. This substance belongs to the family of hydrofluoroolefins (HFOs) and has a molecular weight of 150.02 g/mol. It is classified as a pressurized gas with acute toxicity and specific target organ toxicity properties, requiring careful handling in industrial applications.

1,1,2,3,3,3-hexafluoroprop-1-ene is a colorless gas under normal conditions due to its classification as a pressurized gas. As a highly fluorinated compound, it exhibits low reactivity and chemical stability. The substance has limited solubility in water but shows better compatibility with organic solvents. Its fluorinated structure provides unique thermal and chemical resistance properties typical of perfluorinated compounds.

1,1,2,3,3,3-hexafluoroprop-1-ene is primarily used as a refrigerant and working fluid in cooling systems due to its excellent thermodynamic properties. It serves as an environmentally friendly alternative to traditional refrigerants with high global warming potential. The compound is also utilized in specialty chemical synthesis, foam blowing applications, and as a component in fire suppression systems where its inert properties are advantageous.

Safe handling of 1,1,2,3,3,3-hexafluoroprop-1-ene requires appropriate personal protective equipment including safety goggles, chemical-resistant gloves, and adequate respiratory protection. Work in well-ventilated areas or under fume hoods to prevent accumulation of vapors. Avoid direct contact with skin and eyes, and prevent inhalation. Use proper gas handling equipment designed for pressurized systems and ensure all personnel are trained in emergency procedures.

1,1,2,3,3,3-hexafluoroprop-1-ene must be stored in appropriate pressure vessels designed for compressed gases in a cool, dry, well-ventilated area away from heat sources and ignition points. Keep containers upright and secured to prevent tipping. Store away from incompatible materials and ensure storage areas are equipped with gas detection systems. Regular inspection of storage containers for leaks and proper labeling is essential for safe storage.

In case of skin contact with 1,1,2,3,3,3-hexafluoroprop-1-ene, immediately remove contaminated clothing and flush the affected area with plenty of water. For eye contact, rinse thoroughly with clean water for at least 15 minutes and remove contact lenses if present. If inhaled, move the person to fresh air immediately and provide oxygen if breathing is difficult. Seek immediate medical attention for all exposure cases and contact poison control if necessary.

Disposal of 1,1,2,3,3,3-hexafluoroprop-1-ene must be conducted through licensed hazardous waste disposal facilities equipped to handle pressurized gases and fluorinated compounds. Never release the substance directly into the atmosphere or water systems. Empty containers should be properly depressurized and handled as hazardous waste. Consult local environmental regulations and waste management authorities to ensure compliance with specific disposal requirements for fluorinated gases.

Transportation of 1,1,2,3,3,3-hexafluoroprop-1-ene falls under ADR Class 2 (gases) regulations for dangerous goods transport. Proper packaging in UN-approved pressure vessels is mandatory, along with appropriate hazard labels and transport documentation. Vehicles must be equipped with proper ventilation and emergency equipment. Drivers require ADR certification for transporting dangerous goods, and specific routing restrictions may apply depending on local regulations.

1,1,2,3,3,3-hexafluoroprop-1-ene is subject to REACH regulation for chemical registration and evaluation within the European Union. The substance falls under CLP regulation for classification, labeling, and packaging requirements, displaying GHS04 and GHS07 pictograms with warning signal word. It is not currently listed as a Substance of Very High Concern (SVHC). Additional regulations may apply regarding fluorinated gas emissions and environmental protection depending on the specific application.

1,1,2,3,3,3-hexafluoroprop-1-ene is available through OYSI, a specialized European distributor of industrial chemicals and gases. OYSI provides reliable supply chains across Europe with proper handling, storage, and transport capabilities for pressurized gas products. Their technical expertise ensures compliance with all relevant safety and regulatory requirements. Contact OYSI directly for availability, technical specifications, and delivery options tailored to your specific industrial requirements.