2-methylpropyl 2-methylprop-2-enoate

2-methylpropyl 2-methylprop-2-enoate is an acrylic ester compound with the molecular formula C8H14O2 and CAS number 97-86-9. This chemical substance has a molecular weight of 142.2 g/mol and belongs to the family of methacrylate esters. It is classified as a flammable liquid with skin irritation and sensitization properties, requiring careful handling in industrial applications.

2-methylpropyl 2-methylprop-2-enoate is a liquid organic compound at room temperature with moderate volatility. As an ester, it typically exhibits limited water solubility but good solubility in organic solvents. The substance has a characteristic ester odor and is classified as a Class 3 flammable liquid under ADR regulations, indicating moderate flammability with a flash point above 23°C.

2-methylpropyl 2-methylprop-2-enoate is primarily used as a monomer in polymer synthesis and acrylic resin production. It serves as a key ingredient in the manufacture of coatings, adhesives, and specialty plastics. The compound is also utilized in the production of impact modifiers for various polymer applications and as a reactive diluent in UV-curable formulations for industrial coating systems.

2-methylpropyl 2-methylprop-2-enoate requires protective equipment including chemical-resistant gloves, safety goggles, and protective clothing to prevent skin contact. Work in well-ventilated areas or use local exhaust ventilation to avoid inhalation. Keep away from ignition sources due to its flammable nature. Use appropriate respiratory protection when ventilation is inadequate and ensure emergency washing facilities are readily available.

2-methylpropyl 2-methylprop-2-enoate should be stored in a cool, dry, well-ventilated area away from heat sources and ignition points. Keep containers tightly closed and protected from light to prevent polymerization. Store away from strong oxidizing agents and bases. Maintain storage temperatures below 25°C when possible and ensure proper fire prevention measures are in place due to its flammable classification.

Skin contact with 2-methylpropyl 2-methylprop-2-enoate requires immediate removal of contaminated clothing and thorough washing with soap and water for at least 15 minutes. For eye contact, flush immediately with clean water for 15-20 minutes and seek medical attention. If inhaled, move to fresh air immediately. In case of ingestion, do not induce vomiting and seek immediate medical attention.

2-methylpropyl 2-methylprop-2-enoate must be disposed of according to local and national waste regulations as hazardous chemical waste. The substance should be collected in appropriate containers and handed over to licensed waste disposal companies. Do not discharge into drains, soil, or water bodies. Incineration at authorized facilities with proper emission controls is typically the preferred disposal method for this organic compound.

2-methylpropyl 2-methylprop-2-enoate is classified under ADR as Class 3 (flammable liquids), Packing Group III. Transport requires appropriate UN-approved packaging and proper labeling with flammable liquid hazard labels. Vehicles must be equipped with appropriate fire extinguishing equipment and drivers need ADR certification. Ensure good ventilation during transport and avoid exposure to heat sources or ignition during handling and transportation.

2-methylpropyl 2-methylprop-2-enoate is subject to REACH regulation and must be registered for commercial use in the European Union. It falls under CLP classification requiring appropriate labeling with Warning signal word and GHS02/GHS07 pictograms. The substance is not identified as SVHC (Substance of Very High Concern) but requires compliance with occupational safety regulations due to its skin sensitization and irritation properties.

2-methylpropyl 2-methylprop-2-enoate is available through OYSI, a European distributor of technical chemicals serving industrial customers across Europe. OYSI provides this specialty chemical with proper documentation, safety data sheets, and regulatory compliance support. Professional customers can contact OYSI for availability, technical specifications, and delivery options tailored to their specific industrial requirements and applications.