Phenylmethoxymethylbenzene

Phenylmethoxymethylbenzene is an organic compound with the molecular formula C14H14O and a molecular weight of 198.26 g/mol. This aromatic ether belongs to the class of substituted benzene derivatives, featuring two phenyl groups connected through a methoxymethyl bridge. The compound is identified by CAS number 103-50-4 and presents relatively low hazard characteristics, with no specific GHS pictograms or signal words required for its classification.

Phenylmethoxymethylbenzene is typically a liquid at room temperature with aromatic characteristics due to its benzene rings. The compound has a molecular weight of 198.26 g/mol and contains an ether functional group (-O-) linking the aromatic systems. As an organic compound with significant aromatic character, it likely exhibits limited water solubility but good solubility in organic solvents such as alcohols, ethers, and hydrocarbons.

Phenylmethoxymethylbenzene serves primarily as an intermediate in organic synthesis and chemical manufacturing processes. Its aromatic ether structure makes it valuable for pharmaceutical synthesis, specialty chemical production, and as a building block for more complex organic molecules. The compound may also find applications in fragrance and flavor industries due to its aromatic properties, as well as in research and development for new chemical formulations.

Phenylmethoxymethylbenzene should be handled with standard laboratory safety precautions despite having no specific GHS hazard classifications. Wear appropriate personal protective equipment including safety glasses, chemical-resistant gloves, and laboratory coats. Ensure adequate ventilation when working with the compound to avoid inhalation of vapors. Avoid direct skin and eye contact, and wash hands thoroughly after handling. Work in well-ventilated areas or under fume hoods when possible.

Phenylmethoxymethylbenzene should be stored in tightly sealed containers in a cool, dry, and well-ventilated area away from heat sources and direct sunlight. Keep containers properly labeled and store at ambient temperature unless otherwise specified. Ensure storage areas are equipped with appropriate spill containment measures. Separate from strong oxidizing agents and incompatible materials. Regular inspection of containers for leaks or damage is recommended to maintain product integrity.

In case of skin contact with phenylmethoxymethylbenzene, immediately wash the affected area with soap and plenty of water for at least 15 minutes. For eye contact, flush eyes with clean water for 15 minutes while keeping eyelids open. If inhaled, move the person to fresh air and ensure they rest in a comfortable position. Remove contaminated clothing and wash before reuse. Seek medical attention if irritation persists or if large quantities were involved.

Phenylmethoxymethylbenzene must be disposed of according to local, national, and international waste regulations as an organic chemical waste. Contact licensed waste disposal companies for proper treatment and disposal. Do not pour down drains, sewers, or onto the ground. Small laboratory quantities should be collected in appropriate waste containers and labeled correctly. Consider recycling or recovery options where available. Consult local environmental authorities for specific disposal requirements in your region.

Phenylmethoxymethylbenzene is classified as ADR Class 9 (Miscellaneous dangerous goods), Packing Group III for transportation purposes. This classification indicates it presents relatively lower transport risks compared to higher hazard classes. Ensure proper packaging according to ADR regulations, with appropriate labeling and documentation. Use UN-approved packaging and follow specific quantity limitations for different transport modes. Consult current ADR regulations for detailed transport requirements and restrictions.

Phenylmethoxymethylbenzene is subject to standard chemical regulations including REACH registration requirements in Europe for quantities above one tonne per year. The compound is not classified as a Substance of Very High Concern (SVHC) under REACH regulations. Standard CLP classification and labeling requirements apply, though no specific GHS pictograms are required. Users must comply with local occupational safety regulations and maintain appropriate safety data sheets for workplace use.

Phenylmethoxymethylbenzene is available through OYSI, a trusted European distributor of technical chemicals serving industrial and professional customers across Europe. OYSI provides high-quality chemical products with proper documentation and regulatory compliance. Contact OYSI directly for availability, specifications, and pricing information. As a specialized chemical distributor, OYSI ensures proper handling, storage, and delivery of chemical products while meeting European regulatory requirements and quality standards.